Welders

Home Welders


WL130AH 130AMP AC Honda GX200 Engine Welder Generator

We think this is great as a..

WL130AH 130AMP AC Honda GX200 Engine Welder Generator

PDF
Prod Code: 7000-GEAR-1762
Honda GX200 powered Petrol Welder GeneratorDesigned and manufactured in the UK by GearGB

Honda GX200 powered Petrol Welder Generator

Designed and manufactured in the UK by GearGB


less
Engine Honda GX200
Engine Warranty 3 Years
Fuel Petrol
Alternator Sincro EA130 AC
Weld Current (amps)130AC
Weld voltage (OCV) 55v
Duty Cycle 130A 35%
Duty Cycle 90A 60%
Welding Socket Configuration 2 x DINS 10-25mm²
Aux Socket Configuration 1x16A 230v 1x16A 115V
230V Output 3kW (3.75kVA)
110V Output 3kW (3.75kVA)
Key Operated Electric Start No
Recoil Start Yes
Engine Mounting Low Vibration Angle Mounts
Noise Level @ 7M 70dB(a)
Noise Level LWA 95LW(a)
Fuel Tank Capacity 3.1L
Consumption @75% Load 1.1(L/H)
Oil Alert Shutdown Yes
Oil Capacity 0.6L
RPM 3000
Cylinder 1
Cooling Air
Weight (Kg)58
Length (cm)69.5
width (cm)41
Height (cm)43
Additional Options Welding Cables - LPG Conversion - Hours Meter

What is the difference between an AC and DC welder generator?

When welding, it is important to consider the polarity that is created by the welder. DC (direct current) flows in one direction, resulting in a constant polarity. AC (alternating current) flows half the time in one direction and half the time in the other, changing its polarity 100 times per second with 50-hertz frequency.

In most cases, DC is the preferred welding polarity as it produces smoother welding output than AC and the output is at a consistent current level all the time. All electrodes can be operated on DC as there is the option of DC+ (reverse) polarity or DC- ( straight) polarity. For stick welding in general, DC+ polarity is most commonly used. A DC set offers a higher open circuit welding voltage, resulting in greater penetration when the circuit is completed. They also do not need to be switched between welder and generator outputs, but offer a lower generator output than an equivalent AC set.

On the other hand, with AC output, the welding current alternates from positive flow to negative flow and back again. This means that only some electrodes are designed specifically to operate on AC. The electrodes have certain elements in their coating which help keep the arc ignited as the current output alternates and goes through periods of low and no output. An AC set has a lower open circuit welding voltage, resulting in a poorer penetration when the circuit is completed. They also must be manually switched between welder and generator outputs, although an AC welder generator will offer a higher generator output in comparison to an equivalent DC set.


Order before 1pm and we will deliver your order free of charge the next working day (Monday - Friday) on all in-stock items - UK only for items over £100.00. Geographical supplements will apply to deliveries to all the following postcodes and all non-mainland UK addresses.

BT, IV,KW 1-14, PA21-40, PH 19-26 30-40 41 49 50 and all non-mainland UK addresses

Please note that deliveries to these post codes are an estimated 2-3 days. Please contact us for delivery charges to all post codes above and all non-mainland UK addresses and we will calculate the most cost effective way to deliver your items

Please click the link below to download the 'Dimensional Drawing'

View Dimensional Drawing

Please click the link below to download the 'GearGB Welder Generator Brochure'

View GearGB Welder Generator Brochure
Our Price £723.00
£867.60 inc. vat
Safe Payments by Secure Trading