Welders

Home Welders


LPG WLE180AB 180AMP AC Elec Start Briggs & Stratton Welder Generator
  • LPG WLE180AB 180AMP AC Elec Start Briggs & Stratton Welder Generator
  • LPG WLE180AB 180AMP AC Elec Start Briggs & Stratton Welder Generator

LPG WLE180AB 180AMP AC Elec Start Briggs & Stratton Welder Generator

PDF
Prod Code: 7000-GEAR1-21089
LPG / Petrol dual fuel welder generator powered by Briggs & Stratton XR1450
Designed and manufactured in the UK by GearGB
 

LPG / Petrol dual fuel welder generator powered by Briggs & Stratton XR1450


Designed and manufactured in the UK by GearGB


 


less
Engine Briggs & Stratton XR1450
Engine Warranty 2 Years
Fuel LPG Propane or Petrol
Alternator Sincro EA180 AC
Weld Current (amps) 180 AC
Weld Voltage (OCV) 55v
Duty Cycle 180A 35%
Welding Socket Configuration 2 x DINS 10-25mm²
Aux Socket Configuration 1x16A 230v 1x16A 115V
230V Output 4kW (5kVA)
115V Output 2.2kW (2.75kVA)
Recoil Start Yes
Key Operated Electric Start Yes
Wheel Kit C/W Fold Down Handles Yes
Lifting Eye Yes
Welding Tray Dimensions (cm) L31 W33 H12
Engine Mounting Low Vibration Angle Mounts
Noise Level @ 7M 72dB(a)
Noise Level LWA 96LW(a)
Standard Fuel Tank Capacity 5.3L
Petrol Consumption @75% Load 1.8(L/H)
LPG Consumption @75% Load 1.3 (KG/H)
Oil Alert Shutdown Yes
Oil Capacity 1.1L
RPM 3000
Cylinder 1
Cooling Air
Weight (Kg) 108
Additional Options Welding Cables - LPG Bottle Holder - Long Run 20L PetrolTank

Why should I choose a LPG Dual Fuel option instead of petrol or diesel?

An LPG dual fuel option refers to the conversion of petrol engine to run on either LPG or petrol. Petrol engines weigh less, produce lower emissions and are inexpensive to purchase, in comparison to diesel engines. Although, they have much higher running costs. Diesels are more fuel efficient, but weigh more, produce much greater emissions and are comparitively more expensive to purchase.

LPG essentially enables the user to purchase a lower costing, lighter, lower emission petrol engine and also have the low running costs of a diesel. Advantages include;

•Up to 50% reduction in running costs in comparison to petrol
•60% lower CO2 emissions in comparison to petrol allows a more environmentally friendly operation.
•Due to the lower carbon content of LPG, consumables such as spark plugs and oil have extended life.
•Running times can be extended with the use of larger LPG bottles.
•Safer to use, as LPG avoids the hazard of having to refill a hot engine with highly flammable fuel.
•An LPG conversion means there is no danger of fuel contamination or fuel going stale in the carburettor, a common problem with petrol.
•Re-fuelling is made easier, as the user simply needs to re-connect a new cylinder bottle


What is the difference between an AC and DC welder generator?

When welding, it is important to consider the polarity that is created by the welder. DC (direct current) flows in one direction, resulting in a constant polarity. AC (alternating current) flows half the time in one direction and half the time in the other, changing its polarity 100 times per second with 50-hertz frequency.

In most cases, DC is the preferred welding polarity as it produces smoother welding output than AC and the output is at a consistent current level all the time. All electrodes can be operated on DC as there is the option of DC+ (reverse) polarity or DC- ( straight) polarity. For stick welding in general, DC+ polarity is most commonly used. A DC set offers a higher open circuit welding voltage, resulting in greater penetration when the circuit is completed. They also do not need to be switched between welder and generator outputs, but offer a lower generator output than an equivalent AC set.

On the other hand, with AC output, the welding current alternates from positive flow to negative flow and back again. This means that only some electrodes are designed specifically to operate on AC. The electrodes have certain elements in their coating which help keep the arc ignited as the current output alternates and goes through periods of low and no output. An AC set has a lower open circuit welding voltage, resulting in a poorer penetration when the circuit is completed. They also must be manually switched between welder and generator outputs, although an AC welder generator will offer a higher generator output in comparison to an equivalent DC set.


Order before 1pm and we will deliver your order free of charge the next working day (Monday - Friday) on all in-stock items - UK only for items over £100.00. Geographical supplements will apply to deliveries to all the following postcodes and all non-mainland UK addresses.

BT, IV,KW 1-14, PA21-40, PH 19-26 30-40 41 49 50 and all non-mainland UK addresses

Please note that deliveries to these post codes are an estimated 2-3 days. Please contact us for delivery charges to all post codes above and all non-mainland UK addresses and we will calculate the most cost effective way to deliver your items

Please click the link below to download the 'GearGB Welder Generator Brochure'

View GearGB Welder Generator Brochure

Please click the link below to download the 'Dimensional Drawing'

View Dimensional Drawing
Our Price £1,222.00
£1,466.40 inc. vat
Safe Payments by Secure Trading