Honda EU65is / EU70is Vent

This is the vent to fit the EU65is / EU70is generator that allows the heat from the exhaust to be vented away when stituating the generator into an enclosed space.

Please note, this kit does not direct the exhaust fumes. The exhaust kit will be required in addition to the vent to fully enclose the generator

Cooling air exhaust system for EU65is and EU70is includes high heat, thermo-formed british manuactured custom fit polycarbonate shroud with attached collar, 5 inch (12.5cm) diameter flexible aluminum tube (extendable to 3 metre lenghth), worm clamp, and self tapping screws for attachment. 

Corrugated flexible heat ducting in aluminium which can be easily formed to produce bends, although it is recomended to reduce the bending as much as possible to increase heat flow. Supplied in standard 3 metre lengths compressed to 1 metre. Vent canopy adds only 70mm to total length.

PLEASE NOTE - This kit helps to prevent overheating but you must ensure that the generator has adequate ventilation. The generator cannot be fully encased without sufficient air flow