Honda EU30is Exhaust Vent

This is the vent to fit the EU30is generator that allows the exhaust fumes and heat from the exhaust to be vented away when stituating the generator into an enclosed space.

Cooling air exhaust system for EU30is includes high heat, thermo-formed british manuactured custom fit polycarbonate shroud with attached collar, 5 inch (12.5cm) diameter flexible aluminum tube (extendable to 3 metre lenghth), worm clamp, and self tapping screws for attachment. 

Corrugated flexible heat ducting in aluminium which can be easily formed to produce bends, although it is recomended to reduce the bending as much as possible to increase heat / exhaust gas flow. Supplied in standard 3 metre lengths compressed to 1 metre. Vent canopy adds only 70mm to total length.

THIS IS A MODIFIED EU70is VENT WITH THE CORNERS DRILLED OUT TO ENSURE PERFECT FIT AGAINST THE CARRY HANDLES ON AN EU30is. AS SUCH, THE HANDLES DO NOT NEED TO BE REMOVED. HOWEVER, TAKE CARE TO ENSURE THE SHROUD IS CORRECTLY SEALED TO PREVENT LEAKING

WARNING! A CARBON MONOXIDE DETECTOR MUST BE USED WHEN OPERATING THE GENERATOR WITH THIS PRODUCT

CAUTION! IT IS LIKELY THAT THE EXHAUST PIPE WILL BECOME VERY HOT WHEN THE GENERATOR IS IN OPERATION. DO NOT TOUCH