Sincro EA200AC 200AMP AC Welder Generator Alternator (j609b)
Prod Code: 5010-SINC-WA200
Sincro 2-Pole AC Brushless Welder Generator Alternator.
Direct replacement alternator for EW200 AC
• Protection: IP23
• Weldable electrodes: Rutile
• Supplied with autoresettable thermal breaker against overload
• Can also be used as single phase alternator
This unit is designed to be fitted to an engine of 13hp or above with a 7/8 inch taper shaft (j609b coupling). Check the attached technical drawing 'Taper Shaft Drawings' to match against your existing coupling. If a different coupling is required, please contact us for availability.
Petrol eg. Honda GX390 / Briggs & Stratton XR2100 series
Diesel eg.Yanmar L100 / Lombardini 15LD 440 / Hatz 1B40
|Weld Current (Amps)||200AC|
|Duty Cycle||60% @ 180Amps|
|Duty Cycle||35% @ 200Amps|
|110v output (Kw)||3.5|
|230v output (Kw)||7|
|Dimensions inc Sockets (L x W x H)||49 x 22 x 34cm|
|Taper Fitting||7/8'' (j609b)|
Order before 1pm and we will deliver your order free of charge the next working day (Monday - Friday) on all in-stock items - UK only for items over £125.00. Geographical supplements will apply to deliveries to all the following postcodes and all non-mainland UK addresses.
BT, IV,KW 1-14, PA21-40, PH 19-26 30-40 41 49 50 and all non-mainland UK addresses
Please note that deliveries to these post codes are an estimated 2-3 days. Please contact us for delivery charges to all post codes above and all non-mainland UK addresses and we will calculate the most cost effective way to deliver your items
Please click the link below to download the 'Sincro Welder Range'View Sincro Welder Range
Please click the link below to download the 'Sincro EA / ED Range'View Sincro EA / ED Range
Please click the link below to download the 'Taper Shaft Drawings'View Taper Shaft Drawings
OTHER PRODUCTS YOU MAY BE INTERESTED IN...
£47.40 inc. vatMORE INFO